Scanner Lights For Hire - R300
This is a multi-coloured, moving light that can be set to move and flash with the music due to it’s built-in microphone. It also works well with a smoke machine, which will enhance the beams of light (as seen in the picture), however, it is also really effective just on it’s own, giving colourful light on the dance floor. It's best to put this light on a stand, shining down onto the floor. This light has a variety of different colours and patterns and is well suited to dance parties of any size. It also works well with all our other lights that we offer.
LED Disco Lights For Hire - R200
This is a multi-coloured light that can either be set to a specific colour, fade through the different colours, or flash through all the colours. It can also be set to flash with the music, and the lights are enhanced nicely with a smoke machine, however, it will still look great without one. The light creates a burst of colourful light effects for the dance floor and is a must at any dance party, no matter how big or small. The sky's the limit with how many of these you can use; the more the merrier!
Strobe Light For Hire - R150
A strobe light is like a camera flash. It is a short, bright white burst of intense light that is also known as a crowd blinder. It can be very effective, depending on the type of event you are having. The frequency can be set to flash at different speeds (very slow to very fast). It will definitely be noticed on the dance floor while it's flashing. It can also be used to replicate paparazzi camera flashes for a red carpet effect, and is also ideal for a Halloween party.
Discoball For Hire - R350
This includes a motor to rotate the ball, a pin spot light to shine on the ball to enhance the rays, as well as a stand to hold the discoball up. We have other options for the light that shines on the discoball as well. It works great with a smoke machine, which will make the rays shine off the ball and pierce through the smoke. This is a must have for any 80's themed party or kids disco. The ball is 30cm in diameter which is slightly bigger than your average soccer ball.
Moving Head Wash Light For Hire - R650
This is a more professional type of moving light which can be used for just about anything. It can be set on a standalone mode which can be triggered by the music, it can be set to a programme, or it can be used with a lighting controller for a more intelligent lighting effect. It can also be linked together if there is more than one light so all of the lights can do exactly the same thing at the same time. This type of light is very bright and is best suited to large areas, however, you can control the brightness if need be.
UV Cannons For Hire - R400
A UV cannon (also known as a black light) is an absolute must for a neon party. This light is effective when shone on to white materials and objects, as well as when it is shone on fluorescent paint (which we also sell). The fluorescent paint glows under the UV light for an extremely colourful, vibrant, awesome neon effect. This type of light is perfect for a themed party, especially an 80's themed party. We also have a smaller LED UV light for R250, which is about half as powerful as the UV cannon.
LED Up Lighting For Hire - R200
This is an LED parcan light, and when a couple or more of these lights are placed on the floor, shining up the wall, it creates a beautiful, colourful and ambient effect to light up a room. They can also be used in marquees by clamping them to the poles where they can shine down onto the floor. They can be set to almost any colour and can all be linked together and connected to a lighting controller to change through the colours, or set to fade through different scenes. This can be used to transform any space.


PAR64 Parcan Lighting For Hire - R200
This is a very bright 1000W white halogen light that can be used to light up large areas. We have colour gels that you can put on the front of the light to change the colour. It draws quite a lot of power, so it's best not to connect more than 2 or 3 lights to the same power source because it may trip the power. This light does get quite hot, so it is best suited to an outdoor area where it is out of everyone's way.


Chauvet LED Drape For Hire - R500
This is a 2m x 1.2m LED effect with many pre-programmed awesome looking effects which is a really captivating backdrop that can also be used on the front of a DJ table or against the ceiling. It comes with a control box that is very easy to use, but you can get even more control and effects if you connect it to a DMX lighting controller. Either way its a mesmorising effect that will have people in awe of it's patterns and intelligent sequences.
T-Bar Lighting Stand For Hire - R50
This stand is an effective way to mount lights so they can shine down onto the floor. One stand can typically hold between 2 - 6 lights, depending on their size and weight. It is a basic tripod stand with a horizontal bar to mount the lights.
Trussing For Hire - From R250 Per Piece
Trussing is a more of a professional way to mount lights when compared to T-Bar lighting stands. They are also visually appealing as structures on their own, especially when used with the LED up-lighting. When one LED up-light is placed inside one piece of trussing, it lights up the trussing for a great effect, known as truss warming. The trussing comes in 1m, 2m and 3m pieces, as well as 2-way corner pieces, allowing you to build a goal post shaped structure.
Smoke Machine For Hire - R450 Including Liquid
This is a medium sized smoke machine that comes with enough liquid to last for a few hours of continuous use. A smoke machine gives a great effect on it's own, but it also enhances lights really well. When the light shines through the smoke, it enhances the beams of light which you would not see without the smoke The smoke is non-toxic and can be used indoors without damaging anything or harming anyone. This is a must have for any Halloween, 80's themed or UV party.
Geyser Machine For Hire - R650 Including Liquid
Much like the standard smoke machine, the geyser machine does the same thing, with the addition of having LED lights surrounding the nozzle. This results in the smoke being coloured as you fire it up. It has a variety of different colours and can be placed spraying upwards, sideways or downwards. It comes with a wireless remote to control it, but can also be linked up to a lighting controller in bigger setups.
Hazer Machine For Hire - R650 Including Liquid
A hazer has a similar effect to a smoke machine in that it enhances lighting, however, it is a more subtle and effective way of doing so. The machine creates a fine mist that can be regulated and sprayed continuously to create the exact amount required to enhance the lighting without noticing the smoke too much. It is non-toxic and can be used in quite large areas. The picture demonstrates what moving head lights look like when shining through the haze.
Bubble Machine For Hire - R400 Including Liquid
The bubble machine is a great effect that can be used at kids parties, weddings or themed parties. What more can we say, it's a machine that creates an endless stream of bubbles, awesome right? It includes 1 litre of liquid which will last around 1 - 2 hours of continuous use. The liquid is R80 per litre thereafter.

CA8 Lighting Remote - R50
This is a basic lighting controller that works with a select few lights of ours including the lasers, moving heads and some of our parcans. It allows you to have some basic control over the lights. You can connect the controller to one light which can then be linked to another few lights that are the same model creating a syncronised effect. There is a R25 extra cost per link cables needed for each extra light.

Scanmaster DMX Lighting Controller - R250
The scanmaster is an advanced lighting controller that is compatible with almost all our lighting, giving you full control over all the different features the lights offer. Multiple lights of different models and brands can all be connected at the same time but controlled individually. Cables to connect each light are R25. Not recommended for anyone who hasn't got experience with these sorts of things.

ADJ My DMX Software Lighting Controller
This is a interface that allows you to connect multiple lights to a computer with the My DMX software which is an awesome program allowing you full control over almost any kind of light which has the capabilities of creating breath-taking lighting shows but is also a lot easier to program then the traditional manual DMX controllers such as the Scanmaster.